Results 1 to 8 of 8

Thread: Mori Seiki NL2500 - Must Sell.

  1. #1
    platinm Guest

    Default Mori Seiki NL2500 - Must Sell.

    Mori Seiki NL-2500Y/700 (2006) CNC Turning Center, Live Tooling, Y axis, Bar feeder, (10) Chuck, Tailstock, Low Hours

    Travel
    X- Axis.............................................. .......10.2"
    Z- Axis.............................................. .......31.3"
    Y- Axis.............................................. .......+/- 2.0"
    B-Axis.............................................. ........Yes

    Capacity
    Swing over bed............................................... ..36.4"
    Swing over cross slide.........................................27.7 "
    Max. turning dia............................................... 14"
    Standard turning dia...........................................10.8 "
    Max. turning length............................................ 27.7"
    Bar work capacity.......................................... ....3.1"

    Spindle
    Max. spindle speed............................................. 4,000
    Spindle nose.............................................. .....A2-8
    Thr spindle hole dia...........................................3.6"
    Spindle beaing inner dia.......................................5.5"

    Turret
    # of tool stations.......................................... ...12
    Tool shank dia for boring bar..................................1"
    Turret indexing time...........................................25 sec.
    Max. rotary tool spindle speed.................................6,000

    Feedrate
    Rapid Traverse
    X................................................. .........1181.1 in/min
    Z................................................. .........1181.1 in/min
    Y................................................. .........393.7 in/min
    B................................................. .........275.6 in/min
    C (Spindle rpm)............................................40 0

    Tailstock
    Tailstock travel............................................ ..28.9"
    Tailstock spindle dia.........................................3.1"
    Taper hole of tailstock spindle...............................Live Center MT5

    Tank Capacity
    Coolant tank capacity.........................................7 0 gal.

    Live Tooling:
    7 Tools Total (6 Right Angle & 1 Adjustable)

    Dimensions
    W x L x H................................................. 122.0" x 75.7" x 83.5"

    Weight Lbs (Kg)............................................13 ,420 (6,100)

    Machine Hours:
    Power On: 2,678
    Cutting Hours: 1,710

    PM with e-mail address for pictues.

  2. #2
    Join Date
    Jan 2010
    Location
    Houston, TX
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Mori Seiki NL2500 - Must Sell.

    Where's the machine located? Does it have a parts catcher?

  3. #3
    Join Date
    Mar 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Mori Seiki NL2500 - Must Sell.

    Sorry as I'm not interested in purchasing this. We just bought a new one and it is being installed this week. I saw you have 1 adjustable tool listed in your live tooling. Is this one that can be adjusted to machine on an angle? If so, how do you program it. We ordered one of these tools from MD tooling and I can't find any command in the control fro coordinate rotation.

  4. #4
    Join Date
    Apr 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Mori Seiki NL2500 - Must Sell.

    Did you get the angle tool figured out?
    We use them on NL2500Y and on our NZ2000T3Y3.
    we use a G68.1 to cut and G69.1 to cancel.
    .

  5. #5
    Join Date
    Sep 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Mori Seiki NL2500 - Must Sell.

    Are you still interested in selling this machine?

  6. #6
    Join Date
    Feb 2011
    Posts
    19
    Thanks
    4
    Thanked 0 Times in 0 Posts

    Default Re: Mori Seiki NL2500 - Must Sell.

    Quote Originally Posted by platinm View Post
    Mori Seiki NL-2500Y/700 (2006) CNC Turning Center, Live Tooling, Y axis, Bar feeder, (10) Chuck, Tailstock, Low Hours

    Travel
    X- Axis.............................................. .......10.2"
    Z- Axis.............................................. .......31.3"
    Y- Axis.............................................. .......+/- 2.0"
    B-Axis.............................................. ........Yes

    Capacity
    Swing over bed............................................... ..36.4"
    Swing over cross slide.........................................27.7 "
    Max. turning dia............................................... 14"
    Standard turning dia...........................................10.8 "
    Max. turning length............................................ 27.7"
    Bar work capacity.......................................... ....3.1"

    Spindle
    Max. spindle speed............................................. 4,000
    Spindle nose.............................................. .....A2-8
    Thr spindle hole dia...........................................3.6"
    Spindle beaing inner dia.......................................5.5"

    Turret
    # of tool stations.......................................... ...12
    Tool shank dia for boring bar..................................1"
    Turret indexing time...........................................25 sec.
    Max. rotary tool spindle speed.................................6,000

    Feedrate
    Rapid Traverse
    X................................................. .........1181.1 in/min
    Z................................................. .........1181.1 in/min
    Y................................................. .........393.7 in/min
    B................................................. .........275.6 in/min
    C (Spindle rpm)............................................40 0

    Tailstock
    Tailstock travel............................................ ..28.9"
    Tailstock spindle dia.........................................3.1"
    Taper hole of tailstock spindle...............................Live Center MT5

    Tank Capacity
    Coolant tank capacity.........................................7 0 gal.

    Live Tooling:
    7 Tools Total (6 Right Angle & 1 Adjustable)

    Dimensions
    W x L x H................................................. 122.0" x 75.7" x 83.5"

    Weight Lbs (Kg)............................................13 ,420 (6,100)

    Machine Hours:
    Power On: 2,678
    Cutting Hours: 1,710

    PM with e-mail address for pictues.
    < Please send me your pictures and price to my e-mail: usedcncmt@gmail.com> for Jerry Chen

  7. #7
    Join Date
    Sep 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Mori Seiki NL2500 - Must Sell.

    Is this machine still available? Can't figure out how to PM you!

    thanks!

  8. #8
    Join Date
    May 2008
    Location
    Great State of Wisconsin
    Posts
    1,215
    Thanks
    7
    Thanked 128 Times in 111 Posts

    Default Re: Mori Seiki NL2500 - Must Sell.

    Quote Originally Posted by vamsi View Post
    Is this machine still available? Can't figure out how to PM you!

    thanks!
    I doubt it is still for sale as he posted this almost 3yrs ago. You will not be able to send him a PM as he is just a guest and not a member.

    Stevo
    (The opinions in this post are my own and not those of machinetoolhelp.com and its management)

Similar Threads

  1. Mori Seiki SL-25
    By janmoh in forum Mori Seiki Lathes & Mills
    Replies: 13
    Last Post: 04-03-12, 12:32 AM
  2. Mori Seiki mv55 Mill
    By zagnag in forum Mori Seiki Lathes & Mills
    Replies: 2
    Last Post: 06-09-11, 08:18 PM
  3. Mori NL2500 angled hole macro
    By rob_leuschen in forum Programming / Applications
    Replies: 1
    Last Post: 08-24-10, 06:20 PM
  4. Mori Seiki SL4 Parameters
    By Miguel in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 07-29-10, 06:07 PM
  5. Mori Seiki DL20 G10 code
    By kgt54 in forum Mori Seiki Lathes & Mills
    Replies: 1
    Last Post: 12-16-06, 04:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •