Results 1 to 2 of 2

Thread: spindle orientation

  1. #1
    saptyawan Guest

    Default spindle orientation

    I got problem in spindle orientation with yasnac 80 m cnc controller and used varispeed 626m3 spindle driver. I did adjust from paramater, but still got same problem. I guess this problem become from spindle driver parameter adjustment and i don't have manual to adjust it. Anybody have Varispeed 626m3 spindle driver user manual, please help me. Thanks a lot.

  2. #2
    philserveng Guest

    Default

    this may not be a parameter, it could be a marker pulse problem with the spindle encoder or with a magnetic reference sensor on the spindle shaft. Look at your wiring diagrams for the spindle and see what it has fitted to it.

Similar Threads

  1. Spindle Orientation Problem...
    By mwbishop71@yahoo.com in forum Machine Repair & Troubleshooting
    Replies: 6
    Last Post: 07-07-10, 06:59 AM
  2. Sabre 750 spindle orientation
    By vclark in forum Bridgeport, Cincinnati
    Replies: 7
    Last Post: 06-17-09, 07:28 PM
  3. sharnoa spindle orientation
    By robvmac in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 11-29-07, 06:32 PM
  4. FANUC-6M SPINDLE ORIENTATION TECHNIQUE
    By CHANDRU in forum Haas, Hardinge, Hermle, Hurco, Hitachi
    Replies: 0
    Last Post: 11-17-07, 04:28 AM
  5. fanuc 6m spindle orientation problem
    By raghuvir in forum Nakamura, Niigata & NTC
    Replies: 2
    Last Post: 08-14-06, 10:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •