Results 1 to 2 of 2

Thread: FANUC 18m ERROE CODE 1013

  1. #1
    Join Date
    Mar 2012
    Location
    limington,maine u.s.a.
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default FANUC 18m ERROE CODE 1013

    COULD SOMEONE EXPLAIN WHAT THIS IS AND HOW TO CORRECT IT THANKS b.m.w.THIS IS ON A JOHNSFORD V24 MILLING MACHINE
    Last edited by catway; 03-12-12 at 05:35 PM.

  2. #2
    Join Date
    Jan 2012
    Posts
    346
    Thanks
    0
    Thanked 70 Times in 62 Posts

    Default Re: FANUC 18m ERROE CODE 1013

    Quote Originally Posted by catway View Post
    COULD SOMEONE EXPLAIN WHAT THIS IS AND HOW TO CORRECT IT THANKS b.m.w.THIS IS ON A JOHNSFORD V24 MILLING MACHINE
    I don't believe this is an error on the Control side. I think you'll find its a Machine Alarm number. Accordingly, you should find the definition of the error in the Manual that's associated with the PLC(PMC) program. This information is usually found in the Maintenance or Electrical Wiring manual. The PLC program is the interface between the control and the machine, with the MTB being responsible for the writing and implementation of same. Accordingly, you wont find reference to these errors in the Fanuc Manuals.

    If you're able to find a reference to an Address in the Error Rung of the PLC program, you can find that Rung in the Ladder Program and determine the conditions that cause the error.

    Regards,

    Bill

Similar Threads

  1. fanuc 18m
    By cnapier in forum Daewoo, Doosan, Excel
    Replies: 6
    Last Post: 03-15-12, 07:56 PM
  2. Fanuc 18M Parameters Lost
    By Wes Raczynski in forum Fanuc Controls
    Replies: 3
    Last Post: 09-07-11, 04:06 PM
  3. Fanuc 18M parameter help
    By millerblack in forum Fanuc Controls
    Replies: 4
    Last Post: 08-18-10, 07:15 AM
  4. haas vs. fanuc 18m
    By cnapier in forum Haas, Hardinge, Hermle, Hurco, Hitachi
    Replies: 2
    Last Post: 01-30-10, 11:22 AM
  5. Alarm code 086 on Fanuc 18M Control.
    By supermax73 in forum Fanuc Controls
    Replies: 1
    Last Post: 04-06-08, 07:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •