Results 1 to 3 of 3

Thread: Encoder Problem

  1. #1
    Join Date
    Nov 2009
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Encoder Problem

    We have 3m cnc boring and milling machine with 840d, The problem is that after taking reference of E4 axis of absolute encoder in startup parameter 34210,
    E4 references but cannot remember its reference values and changes at any position wherever you want, secondly after doing it speed of tool magazine has reduced, what i have to do to solve this problem?

  2. #2
    Join Date
    May 2012
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Encoder Problem

    hi,Our company is mainly engaged in the cnc, but I am not a professional one, if you like,I can let our technical department to explain to you.

  3. #3
    Join Date
    Dec 2012
    Posts
    10
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Re: Encoder Problem

    Quote Originally Posted by anjum View Post
    We have 3m cnc boring and milling machine with 840d, The problem is that after taking reference of E4 axis of absolute encoder in startup parameter 34210,
    E4 references but cannot remember its reference values and changes at any position wherever you want, secondly after doing it speed of tool magazine has reduced, what i have to do to solve this problem?
    Hi there
    I'm here to help people who have any kind of CNC problem specially Haas; fanuc; siemens ;PA ; fagor;hust;engelhardt;....... I will try my best to resolve your problem. I have about 16 yrs CNC field service experience. I will feel great to help others.
    daivid.(maleky.davoud@hotmail.com)
    best wishes for all.

Similar Threads

  1. fanuc 6MB encoder dummy plug for master board
    By russ ss in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 01-14-10, 06:41 PM
  2. Ballscrew/encoder resolution calculations when turning off the scale
    By Petro in forum General CNC & Manufacturing Discussion
    Replies: 0
    Last Post: 06-28-08, 11:14 PM
  3. Sin/Cos Encoder Precision
    By FabGir in forum Automation & Interfacing / Installation / Ladder logic
    Replies: 6
    Last Post: 06-02-08, 01:27 PM
  4. swapping b axis to motor encoder on makino a77
    By hantsboy in forum Makino & Matsuura
    Replies: 5
    Last Post: 04-07-08, 05:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •