Results 1 to 6 of 6

Thread: Fanuc Main Board Alarm LED #2 Help !!

  1. #1
    Join Date
    Feb 2010
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Exclamation Fanuc Main Board Alarm LED #2 Help !!

    I need a manual or help with Main Board # A16B-2201-0080. Alarm LED 2 is on and I don't know what this indicates. Interface no longer turns on.

    Here is a link to a picture of the board.
    baycomposites.com/imagehost/fanuc.jpg

    Thanks

  2. #2
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Fanuc Main Board Alarm LED #2 Help !!

    Quote Originally Posted by Fonzi View Post
    I need a manual or help with Main Board # A16B-2201-0080. Alarm LED 2 is on and I don't know what this indicates. Interface no longer turns on.

    Here is a link to a picture of the board.
    baycomposites.com/imagehost/fanuc.jpg

    Thanks
    your controller is 16. the 18th is similar
    link where the same problem was discussing in next message
    Last edited by guhl; 02-09-10 at 07:20 AM.

  3. #3
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Fanuc Main Board Alarm LED #2 Help !!

    can't insert the link because of the little number of messages

  4. #4
    Join Date
    Jan 2010
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts

  5. #5
    Join Date
    Feb 2010
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Fanuc Main Board Alarm LED #2 Help !!

    Thank You for the reference. Still waiting for a fix.

  6. #6
    Join Date
    Aug 2008
    Location
    huber heights, ohio
    Posts
    177
    Thanks
    2
    Thanked 12 Times in 12 Posts

    Default Re: Fanuc Main Board Alarm LED #2 Help !!

    what control do you have on your machine?

Similar Threads

  1. Help finding correct fanuc oreintion board
    By pmcbs in forum ALL Other Builders not listed below
    Replies: 1
    Last Post: 02-27-11, 05:42 PM
  2. Ethernet board for fanuc 21i MB controller
    By ltx8d in forum Fadal, Fanuc, Fidia, Fryer
    Replies: 0
    Last Post: 12-21-10, 01:57 PM
  3. fanuc 6MB encoder dummy plug for master board
    By russ ss in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 01-14-10, 07:41 PM
  4. Fanuc/Secos orientation board
    By Keshka in forum Haas, Hardinge, Hermle, Hurco, Hitachi
    Replies: 10
    Last Post: 11-30-09, 10:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •