Results 1 to 2 of 2

Thread: Programming help for miyano bnc34t

  1. #1
    Join Date
    Jan 2007
    Posts
    42
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Programming help for miyano bnc34t

    Hellow friends,

    we do have one miayano bnc 34t with lns hydrobar feeder of finger type.

    Any body please help as how to progrm using the bar feeder like m-codes and g-codes with a sample program.the controller is fanuc otb. What are the essential conditions.

    Thanks
    chandru

  2. #2
    Join Date
    Oct 2010
    Location
    Europe
    Posts
    31
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default Re: Programming help for miyano bnc34t

    %
    O1000(MAIN PROGRAM)
    G00G28U0.0V0.0M5

    M998

    /M98P9999 (JUMP IF BAR END)

    M999

    G40
    M91
    .....(REST OF PROGRAM

    %
    O9999(BARCHANGE PROGRAMM)

    G4U1.0

    G00G28U0.0V0.0M5
    M9
    M29
    M109
    M139
    T1212
    G97G99G00Z100M3S100

    M17
    M83
    M18
    G0054G96M33S1000
    G01X-1.0F0.08
    G00G28U0.0M95
    W50.0
    M84

    M99
    %


    Note; The /-button in group 1 must always be on. The barfeed will blend this out over the "end of bar" -signal.

Similar Threads

  1. Miyano TSV-21 ATC Problem
    By ixoxi999 in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 11-02-10, 12:07 AM
  2. MIYANO Model BNC-42
    By NORMAC in forum Mazak, Mitsubishi, Miyano, Monarch, Mighty, Modig
    Replies: 7
    Last Post: 11-01-10, 09:21 AM
  3. Miyano alignment
    By davbro14 in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 10-29-10, 03:37 PM
  4. miyano bnc34t programm help
    By CHANDRU in forum Mazak, Mitsubishi, Miyano, Monarch, Mighty, Modig
    Replies: 0
    Last Post: 09-04-09, 07:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •