Results 1 to 10 of 10

Thread: sr 823 framing error

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2009
    Location
    texas
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default sr 823 framing error

    i keep getting this error on my mori seiki sl-25 whenever i try to upload from my pc. contacting fanuc for help gets me nowhere as all paramaters are set correctly i have made a new cable as instructed by fanuc any help? mori seiki sl-25 lathe using a fanuc 10-t controller

  2. #2
    Join Date
    Sep 2005
    Location
    Wisconsin
    Posts
    1,005
    Thanks
    5
    Thanked 75 Times in 65 Posts

    Default

    First-Are you able to output the file from the machine? and is it readable when opened in wordpad?

  3. #3
    Join Date
    Mar 2009
    Location
    texas
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default sr 823 framing error

    yes i can download fom my machine to my pc and it is readable but a no go from pc to machine also i am using edi to communicate between machines

  4. #4
    Join Date
    Sep 2005
    Location
    Wisconsin
    Posts
    1,005
    Thanks
    5
    Thanked 75 Times in 65 Posts

    Default

    Post the program or attach the file that came out of the machine so I can see the format that it output. Also Try changing your stop bit from 1 to 2 or 2 to 1 within your PC communication software and try again.

  5. #5
    Join Date
    Mar 2009
    Location
    texas
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default sr 823 framing error

    k thanks ill try that in the meantime i will also try to post a sample for you to review

  6. #6
    Join Date
    Sep 2005
    Location
    Wisconsin
    Posts
    1,005
    Thanks
    5
    Thanked 75 Times in 65 Posts

    Default

    Basically take your program. Usually strip all the jiberish if there is anything right after the percent sign in the beginning and before the end percent sign of the program. Usually its only one line. Then try reuploading the file that was output originally without the jiberish to make sure there are all good characters within the program.

  7. #7
    AndyAndersson Guest

    Default Re: sr 823 framing error

    Framing error is usually specifically the Start and Stop bits.

    But it can also occur if you set the wrong number of data bits making the 'word' too short.

    Make sure you're set to the correct number of data bits (usually 7 or 8) the correct parity (usually even or None) and the correct number of Stop bits 9usually 1 or 2)

    So, if it's 7 databits then I'd say there must be a parity bit too.
    If it's 8 databits then there probably is no parity
    and on most CNC the number of stop bits doesn't usually cause a framing error.

  8. #8
    Join Date
    Aug 2017
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: sr 823 framing error

    these how i set up my DNC
    stop bits 1 (and 2) databits 7 parity none (and even
    CIDCOM transfer ok, but mori seiki error sr823 framming


    stop bits 1(and 2) data bits 8 parity none (and even) have same error.
    how i can fix it ?
    and this my programe

    %
    O1209 (TIEN BULY)
    G21
    T0404
    G97 S700 M03
    G50 S700
    G96 S700
    M8
    G0 X72. Z2.
    G99 G1 Z2.5 F0.2
    Z-23.3
    X74.
    X76.828 Z-21.886
    G0 Z4.5
    X70.021
    G1 Z2.5
    Z-23.3
    X72.411
    X75.239 Z-21.886
    G0 Z4.5
    X68.032
    G1 Z2.5
    Z-23.3
    X70.421
    X73.249 Z-21.886
    G0 Z4.5
    X66.042
    G1 Z2.5
    Z-23.3
    X68.432
    X71.26 Z-21.886
    G0 Z4.5
    X64.053
    G1 Z2.5
    Z-.237
    G18 G3 X64.4 Z-.8 I-.826 K-.563
    G1 Z-23.3
    X66.442
    X69.271 Z-21.886
    G0 Z2.
    X-0.2
    G1 Z0.
    X64
    G18 G3 X64. Z-.8 K-.8
    G1 Z-23.5
    X64.
    G0Z200
    M9
    T0909
    G97 S269 M3
    G50 S300
    G96 S175
    M8
    G0 X0. Z1.
    G1 X0. Z-10. F0.1
    G0 Z1.
    G0 Z-9.5
    G1 Z-20.
    G0 Z1.
    G0 Z-19.5
    G1 Z-30.
    G0 Z1.
    G0 Z-29.5
    G1 Z-40.
    G0 Z50.
    M9
    T0707
    G97 S269 M03
    G50 S1000
    G96 S175
    M8
    G0 X28. Z2.
    G71 P1 Q2 U-0.3 W0. D600 F0.2
    N1 G0 X30.8
    G1 Z0.
    G2 X30. Z-0.8 R0.8
    G1 Z-15.9
    X29.
    G1 Z-24.
    N2 X28.
    G70 P1 Q2 F0.05
    G0 Z200.
    T0202
    G18
    G97 S1000 M03
    G0 G54 X66.588 Z-6.971
    G50 S600
    G96 S302
    M8
    G1 X54.657 F.05
    G0 X65.636
    Z-5.894
    G18 G2 X63.765 Z-5.662 I-.935 K-1.768 F.1
    X62.588 Z-5.75 K-2.
    G1 X54.657 Z-6.971
    G0 X66.588
    Z-8.252
    G1 X46.325
    G0 X57.705
    Z-7.115
    G2 X55.833 Z-6.882 I-.936 K-1.768
    X54.657 Z-6.971 K-2.
    G1 X46.325 Z-8.252
    G0 X66.588
    Z-9.534
    G1 X38.735
    G0 X49.373
    Z-8.396
    G2 X47.501 Z-8.164 I-.936 K-1.768
    X46.325 Z-8.252 K-2.
    G1 X39.388 Z-9.32
    G2 X38.735 Z-9.534 I.206 K-.669
    G0 X66.588
    Z-10.816
    G1 X38.735
    X38.992 Z-10.688
    G0 X66.588
    Z-12.098
    G1 X46.325
    X39.388 Z-11.03
    G3 X38.735 Z-10.816 I.206 K.669
    G0 X66.588
    Z-13.379
    G1 X54.657
    X46.325 Z-12.098
    G0 X66.588
    X65.636
    Z-14.456
    G3 X63.765 Z-14.688 I-.935 K1.768
    X62.588 Z-14.6 K2.
    G1 X54.657 Z-13.379
    G0 X66.588
    G18
    G97 S500
    Z-4.118
    X65.475
    G1 X62.647 Z-5.532 F.05
    X39.271 Z-9.128
    G18 G2 X38. Z-9.989 I.264 K-.86
    G1 Z-10.175
    X38.185 Z-10.083
    G0 X65.475
    G18
    Z-16.232
    G1 X62.647 Z-14.818
    X39.271 Z-11.222
    G18 G3 X38. Z-10.361 I.264 K.86
    G1 Z-10.175
    G0 X65.475
    G28 U0. V0. W0. M05
    M9
    M30
    %

  9. #9
    Join Date
    May 2018
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: sr 823 framing error

    Hi there,

    Could you solvent it? Same issue here...

Similar Threads

  1. Matsuura Mc500v seq error/magazine error
    By MC500V in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 02-03-09, 10:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •