Results 1 to 1 of 1

Thread: very basic stuff

  1. #1
    Join Date
    Nov 2007
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default very basic stuff

    I have always used canned cycles and was wondering how to programme (purely in G codes and the like)a series of cuts e.g. 80mm dia x 60mm long up to 120 dia x 150 long x 1.8 mm depth of cut i.e. x80 z-60; x120 z-60; x120 z-150 . Oh and the original dia was 185mm. Any ideas would be appreciated.Fanuc control, colchester lathe.
    Last edited by martin; 02-28-09 at 07:18 PM. Reason: missed bit off

Similar Threads

  1. sigma control basic
    By breazr in forum Automation & Interfacing / Installation / Ladder logic
    Replies: 0
    Last Post: 03-05-13, 02:46 AM
  2. Some basic questions...
    By Cfin in forum General CNC & Manufacturing Discussion
    Replies: 3
    Last Post: 11-07-09, 09:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •