Results 1 to 1 of 1

Thread: Ycm tool changer hang up.

  1. #1
    Join Date
    Apr 2017
    Location
    Maine
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Ycm tool changer hang up.

    I reset z home position and did tool change. Tool was in the spindle, but the mag pocket was empty.
    The machine did the m19 and grabbed tool, it removed tool and rotated. After returning the tool to the pocket, it stopped without any alarms. I can't back arm away by usual method. Any thoughts?
    My machine is a fv102a with an 18m control, the tool changer is twin arm side mount.
    Last edited by Danny446; 04-26-17 at 10:29 AM. Reason: Added machine spec.

Similar Threads

  1. Tool changer help...
    By aesolinger31 in forum Machine Repair & Troubleshooting
    Replies: 7
    Last Post: 04-26-17, 09:40 AM
  2. Tool changer arm not picking up tool
    By rekluse in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 08-06-12, 06:17 PM
  3. Tool Changer
    By Middik in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 01-26-12, 10:04 PM
  4. tool changer jamming
    By camelot129 in forum General CNC & Manufacturing Discussion
    Replies: 3
    Last Post: 09-21-11, 01:15 AM
  5. Help with Tool changer
    By eggsarecrunchy in forum Programming / Applications
    Replies: 5
    Last Post: 07-20-11, 11:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •