Results 1 to 2 of 2

Thread: Chinese CNC 2417 with Laseraxe CNCC MINI

  1. #1
    Join Date
    Apr 2017
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Chinese CNC 2417 with Laseraxe CNCC MINI

    Hello everyone.
    This is my first post and my first aproach to the CNC world.

    I bought a 2417 CNC from Aliexpress. Every components seems to be perfect. I followed all instructions of assembly, and then I installed the CH340 driver (usb). I run the software grblControl (Laseraxe_CNC.exe) and the software recognize the machine, because I can see the "Idle" state.

    When I send some instruction or .cn file to the machine, the software seem to be working on every instruction, but the steper motors doesn't move anything. If I turn on the spindle, it doesn't move anything too. The status of the machine change from "Idle" to "Run"

    The led lights on the controller board blinks when I connect the machine, blinks when the instructions of the software are running, but the motors doesnt move at all.

    I measured the AC Adapter with a tester, and shows 11-12 volts, it seem ok.

    I'm really a novice about the CNC world, so please if you could give me an advice of what I have to test or review.

    Any idea will be very welcome.

    Thank you guys!

    Best Regards,
    shunsho.

  2. #2
    Join Date
    Apr 2017
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Chinese CNC 2417 with Laseraxe CNCC MINI

    Hello everyone.
    Somebody has any idea or advice please?
    Thank you!

Similar Threads

  1. Chinese CNC
    By romuros in forum General CNC & Manufacturing Discussion
    Replies: 4
    Last Post: 06-12-17, 07:18 AM
  2. my cnc 2417 z axis movement in opposite direction.. what i do?
    By laiju1989 in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 04-06-17, 01:23 PM
  3. Matsuura mini master 500
    By Muffler101 in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 11-26-13, 09:34 PM
  4. Need help setting up cheap Chinese laser cutter!
    By budgetcomputer in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 09-23-12, 08:03 AM
  5. hello from a Chinese friend
    By richardhuang in forum Introduce Yourself
    Replies: 2
    Last Post: 06-29-12, 10:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •