I am looking for a used, in good condition, Model Master 4-axis mill.
I am looking for a used, in good condition, Model Master 4-axis mill.
What is it used for?
4-axis milling and machining
Integral Machining Ltd– IML specializes in a smaller size range for milling. All of the machines are capable of full, simultaneous 4 axis machining. Maximum spindle speed ranges are from 8000 – 20,000 rpm. These machines are ideally suited to machine light duty alloys and plastics requiring higher spindle speeds.
Below are just a few examples of the parts that have been machined in the Machining Centre Department. Aerospace communications component: Full 6 sided machining, high speed toolpaths and optimized tooling. 10lbs of material removed. All 6 sides need post anodizing machining.
Medical device component: Used in patient positioning. utilizes 4th axis positioning for the radial work.
Medical device compnent #2 Surgical device: Extensive full 4 axis milling. 304 stainless steel
Nuclear device component: Uses multiple fixtures for post-turning machining. 304 Stainless steel, tight bore tolerances in deep holes
Contact us at 905.847.1565 or visit our website at http://www.imach.ca if you have any questions in regard to our Machining Center and Machining Solutions we offer.