Results 1 to 2 of 2

Thread: Ooya vmc 1100 lube lines broken

  1. #1
    Join Date
    May 2011
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Question Ooya vmc 1100 lube lines broken

    HELLO GUYS , HAS ANYONE REMOVED THE LUBE LINES FROM THE WAYS ,I TRIED TO PULL ONE THAT WAS BROKEN OUT ,IT JUST SNAPPED OFF IN THE WAY , MUST BE A WAY OF REMOVE
    L ,LOOK TO BE JUST PUSHED IN THE HOLE WITH SEALANT ,WILL DRILL THEM OUT IF I HAVE TO ,BUT DONT WANT TO,FEAR NOT PROPERLY CLEARING THE HOLE OF LINE MATERIAL OR ENLARGING HOLE TO MUCH, ANY ONE HAD TO DEAL WITH THIS. THANKS RONF

  2. #2
    Join Date
    May 2011
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Re: Ooya vmc 1100 lube lines broken

    OK i found that giving the tube a turn back and forth that they will losen and come out , and some broke off ,on those i used a small drill to drill out the piece that was left in the hole ,the ones i couldn't reach with the drill , i used a small wood screw to screw into the piece that was in the hole , and pulled those out with a pair of channel lock plires , relaced all with new tubing and new ferrules and were ready to go again , thanks to my self for finding the answer

Similar Threads

  1. Ooya vmc 1100 fanuc control
    By RON F in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 02-28-17, 10:01 AM
  2. ooya re-1m 4th axis
    By RON F in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 12-12-16, 03:30 PM
  3. How to deteck broken tooling in FANUC15B
    By =aike= in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 07-07-14, 11:53 AM
  4. Broken tool message
    By =aike= in forum Fanuc Controls
    Replies: 1
    Last Post: 10-31-11, 08:42 AM
  5. Machining circle with four lines(PROJECTIONS) at 90 Degrees apart
    By shabibullah in forum Programming / Applications
    Replies: 5
    Last Post: 12-29-10, 03:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •