Results 1 to 9 of 9

Thread: CNC DAEWOO PUMA 240M

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Guest Guest

    Default CNC DAEWOO PUMA 240M

    IM HAVING A TURRET PROBLEM IM GETTING A 2047 ALARM WITCH TELLS ME ITS A SENSOR OR CONTROLER
    IS THERE AN EASY WAY TO TROUBBLE SHOOT THIS

    WHEN I BOOT UP THE MACHINE I GET THIS ALARM MACHINE WAS WORKING FINE HAD IT DOWN A FEW DAYS AND WHEN REBOOTED HAD THIS TURRET PROBLEM

    IF ANYONE HAS ANY INFO ON THIS PLEASE EMAIL ME

    THANKS

  2. #2
    Guest Guest

    Default

    First check the simple things related to the turret. LIke the clamp and unclamp sensors- Is there a turret clamp light on the control? Also what is the exact description of the alarm in the book. I don't beleive that its a fanuc alarm? What control is the machine??

  3. #3
    Join Date
    Jun 2009
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: CNC DAEWOO PUMA 240M

    Please check the turret disc if is properly clamped, check the proximity switch input if it is ON after the turret is clamped.

    It could you have a problemn with prox. clamped switch taht need to adjust the sending distance ( you have to open up at the back of the cover to see the prox. switch) or you have a probelem with the turrret drive. I beleived it is a I motion turret drive, please check the alarm on the drive so it help to dignose the problem further.

    Good luck!
    Miles

  4. #4
    chris1960 Guest

    Default Re: CNC DAEWOO PUMA 240M

    Also chack the battery in the servo driver, if you have Alarm ALP-EN, if so change battery, then Alarm 2047 should disappear

  5. #5
    Join Date
    Mar 2009
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: CNC DAEWOO PUMA 240M

    many things could cause that alarm but maily it will be the battery of the servo drive of the turret, when you replace the battery the alarm will disappear but you will still need to adjust the turret position.
    you may send me your e-mail,, and i will send you the steps to do that.

    sting

  6. #6
    Join Date
    Sep 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: CNC DAEWOO PUMA 240M

    Im having the same turret problem. I need the steps to adjust the turret posittion after replace the servo battery.

    Thanks

    Castor



    Quote Originally Posted by cnctek View Post
    many things could cause that alarm but maily it will be the battery of the servo drive of the turret, when you replace the battery the alarm will disappear but you will still need to adjust the turret position.
    you may send me your e-mail,, and i will send you the steps to do that.

    sting

  7. #7
    Join Date
    Aug 2011
    Location
    Texas
    Posts
    49
    Thanks
    0
    Thanked 4 Times in 4 Posts

    Default Re: CNC DAEWOO PUMA 240M

    First please check that battery level of servo driver if it is in constant level or any.. From the battery driver will affect that alarm while turrent processing and otherwise some problems in that motion turret drive.. Switch your proper sending distance and clamped well..

    Check out the manual before checking such process..

    We are having cnc machining and edm machining process

  8. #8
    Join Date
    Apr 2018
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: CNC DAEWOO PUMA 240M

    Quote Originally Posted by cnctek View Post
    many things could cause that alarm but maily it will be the battery of the servo drive of the turret, when you replace the battery the alarm will disappear but you will still need to adjust the turret position.
    you may send me your e-mail,, and i will send you the steps to do that.

    sting

    Could you send me the information as well . I have the same alarm on my Daewoo. Thanks. (jason.burt@parker.com)

  9. #9
    Join Date
    Jun 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: CNC DAEWOO PUMA 240M

    Quote Originally Posted by Guest View Post
    IM HAVING A TURRET PROBLEM IM GETTING A 2047 ALARM WITCH TELLS ME ITS A SENSOR OR CONTROLER
    IS THERE AN EASY WAY TO TROUBBLE SHOOT THIS

    WHEN I BOOT UP THE MACHINE I GET THIS ALARM MACHINE WAS WORKING FINE HAD IT DOWN A FEW DAYS AND WHEN REBOOTED HAD THIS TURRET PROBLEM

    IF ANYONE HAS ANY INFO ON THIS PLEASE EMAIL ME

    THANKS
    trol unit alram and turret switch alarm over plz. give me salutaion of this problem

    Thanks,

Similar Threads

  1. Doosan Puma 240m
    By bkwalker in forum Programming / Applications
    Replies: 1
    Last Post: 08-24-11, 10:08 AM
  2. Daewoo Puma 12S
    By semmach in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 06-22-09, 08:01 AM
  3. Daewoo puma 10
    By Indmach in forum Fagor Controls & Automation
    Replies: 0
    Last Post: 01-23-09, 07:33 PM
  4. Daewoo Puma 12S
    By semmach in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 10-21-08, 03:05 PM
  5. CNC DAEWOO PUMA 240M
    By Guest in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 04-02-06, 09:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •