Hi everyone,
I am very new to CNC routing and at times are having some trouble. I'm not sure specifically what is causing my problem but thought I would start here. Basically I design my part in AutoCAD, use Vectric Cut 3D to generate code and Mach 3 to send the code to the controller.
What happens is shortly after starting cutting out a piece, the machine just jumps to another location and starts cutting out the toolpath out still but has shifted the origin point making everything out of line.
I have tried to remodel the cog in AutoCAD, repathed the toolpath and have turned off my computer and back on again. Sometimes it actually cuts the piece out ok then other times I have the problem. I am stumped. Any help would be greatly appreciated.
Thanks
Andrew