Results 1 to 3 of 3

Thread: spindle motor drawing 10 times more current with encoder...

  1. #1
    Join Date
    Aug 2013
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default spindle motor drawing 10 times more current with encoder...

    A spindle motor : Saccardo VA25C 's winding was burnt due to water.Got the motor re-wind.Also replaced the encoder=Heidenhain AK ERM 220.After the rewinding and encoder replacement the motor is taking 13 Amps of current without encoder and is drawing 130 to 140 Amps of current if the encoder is installed.The ampere values stated above are the values that are shown on the display of the inverter drive (VFD)=Omron-Yaskawa Varispeed F7.The specs of motor : 37 KW / 75 Amp / 400 V / 6 Pole / F nom =75 Hz / 1500 rpm -nom / 8000 rpm- max.Can anybody help?

  2. #2
    Join Date
    Mar 2017
    Posts
    14
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: spindle motor drawing 10 times more current with encoder...

    you need know how to operate the control panel, then you need change the parameter according to the operation manual .

    www.invoee.net INVOEE, your reliable inverter expert.

  3. #3
    Join Date
    Apr 2017
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: spindle motor drawing 10 times more current with encoder...

    [COLOR=#2B2B2B][FONT=Arial]
    检测到:中文

Similar Threads

  1. VM3/VF3 Spindle times
    By Atticu in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 03-11-12, 11:14 PM
  2. encoder of turret motor [BNC-34/42C3]
    By bdrk in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 02-17-11, 02:06 PM
  3. swapping b axis to motor encoder on makino a77
    By hantsboy in forum Machine Repair & Troubleshooting
    Replies: 5
    Last Post: 04-07-08, 05:58 AM
  4. spindle drawing - Takumi v18 1997
    By HalfEvil in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 11-27-07, 04:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •