Results 1 to 5 of 5

Thread: moriseiki mv 35/40 fanuc 6m need help

  1. #1
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default moriseiki mv 35/40 fanuc 6m need help

    I have ER3 alarm on my machine a plz tell Me how to reset alarm and
    How to bring act to home position and also related.
    Parameters

  2. #2
    Join Date
    Feb 2013
    Location
    chennai
    Posts
    27
    Thanks
    1
    Thanked 1 Time in 1 Post

    Thumbs up Re: moriseiki mv 35/40 fanuc 6m need help

    you check that pc parameter no 3004&3005 check and any one digit are 1 to read that machine manual.chek alarm on atc ,machine malfunction&chek lubrication oil level.pc parameter 4000 is 0000.

  3. #3
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Smile Re: moriseiki mv 35/40 fanuc 6m need help

    Quote Originally Posted by karthick View Post
    you check that pc parameter no 3004&3005 check and any one digit are 1 to read that machine manual.chek alarm on atc ,machine malfunction&chek lubrication oil level.pc parameter 4000 is 0000.
    thanks for solution but i still ididnt understand what u said tell me in brief plz i dont have machine manual and u said 3004 & 3005 parameters what should i do in that parameters & tell me is parameter 4000 must be oooo or should i give tool number

  4. #4
    Join Date
    Feb 2013
    Location
    chennai
    Posts
    27
    Thanks
    1
    Thanked 1 Time in 1 Post

    Default Re: moriseiki mv 35/40 fanuc 6m need help

    first you have check that dgn no 48 condition and pc parameter no 3004&3005bit condition and pc parameter 240-259 is the alarm on reply me .
    dgn 48 is the atc home position limit switch& sensor. pc parameter 240 to 250 is the error2 alarm,250 to 259 is the error3 alarm.error3 is the machine malfunction.just you have correct that limit switch position.error1 is the spindle alarm.
    Last edited by karthick; 03-15-13 at 02:58 AM.

  5. The Following User Says Thank You to karthick For This Useful Post:

    pandurang (03-15-13)

  6. #5
    Join Date
    Mar 2013
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Re: moriseiki mv 35/40 fanuc 6m need help

    thank u dude i will chek tommo and reply u 08698220451 this my cell no and may i know yours number

Similar Threads

  1. need help moriseiki MV 45 fanuc 6m
    By karthick in forum Machine Repair & Troubleshooting
    Replies: 13
    Last Post: 03-15-13, 03:09 AM
  2. need help moriseiki mv 45 fanuc 6MB control
    By karthick in forum Fanuc Controls
    Replies: 0
    Last Post: 03-14-13, 12:01 AM
  3. help lost parameters moriseiki sl-2 fanuc 3t
    By quannv683 in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 11-28-11, 08:35 PM
  4. Alarm 101 fanuc moriseiki
    By ADMACHINE in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 06-21-11, 02:35 PM
  5. 1981 MoriSeiki Sl1 Fanuc 6t...Missing tape reader, no power on crt
    By Icedinsx in forum Machine Repair & Troubleshooting
    Replies: 5
    Last Post: 03-07-09, 04:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •