Results 1 to 2 of 2

Thread: spindle orientation

  1. #1
    saptyawan Guest

    Default spindle orientation

    I got problem in spindle orientation with yasnac 80 m cnc controller and used varispeed 626m3 spindle driver. I did adjust from paramater, but still got same problem. I guess this problem become from spindle driver parameter adjustment and i don't have manual to adjust it. Anybody have Varispeed 626m3 spindle driver user manual, please help me. Thanks a lot.

  2. #2
    philserveng Guest

    Default

    this may not be a parameter, it could be a marker pulse problem with the spindle encoder or with a magnetic reference sensor on the spindle shaft. Look at your wiring diagrams for the spindle and see what it has fitted to it.

Similar Threads

  1. VTC-41 Mazak spindle orientation
    By cnctx in forum Machine Repair & Troubleshooting
    Replies: 4
    Last Post: 04-26-11, 02:06 PM
  2. Spindle Orientation Speed
    By bdrk in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 04-09-11, 10:39 AM
  3. Spindle Orientation Problem...
    By mwbishop71@yahoo.com in forum Machine Repair & Troubleshooting
    Replies: 6
    Last Post: 07-07-10, 06:59 AM
  4. Sabre 750 spindle orientation
    By vclark in forum Machine Repair & Troubleshooting
    Replies: 7
    Last Post: 06-17-09, 07:28 PM
  5. sharnoa spindle orientation
    By robvmac in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 11-29-07, 07:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •