hi
i have Fanuc Tape Drill Mate machine with fanuc OM Mate control. I need a list of parameters . Thans
hi
i have Fanuc Tape Drill Mate machine with fanuc OM Mate control. I need a list of parameters . Thans
I have the parameters if you still need them.....
kocen (01-03-13), valanjo2001 (06-13-19)
I have a Fanuc drill mate om mate model T. When change tool. it has 96 alarm. have any body help me? Why?
Kidcnc,
According to the alarm description you are trying to change a workoffset when you are not allowed to. Can you post your tool change program? It appears that it is a code issue.
Also for future reference when you have a problem please start a new thread and label it to specify your problem. This thread is over 2yrs old. It just helps keep the forum a bit cleaner and also directs people to your problem because the title represents your issue.
Steve
(The opinions in this post are my own and not those of machinetoolhelp.com and its management)
Thank you! Stevo!
I knew why? due to the parameter number 128 is ' 0' . I changed it to 1 to 10. it 's ok. para 128 is tool on spindle.
Hi I am from Turkey adult
STAMA fanuc mate, I have om
parameters are required
2005 is alarming magazine (werz)
brothers want to help![]()
Here, OC parameter. Everyone can download.
I am knwe here..
i have a question
what can i do to restablish the parameters of cnc milling with fanuc om control..
yesterday the electrical voltage turn off while i was sending information to the control...and when i turn on the machine it showed an alarm that mention that the memory have to be cleaned. I pushed the boton reset and the boton delete and at the same time I turn on the machine. i do that but the control showed other alarm..it say that the servomotor is not ready or something happend whit it ...and i checked the parameters and those are cleaned or setting in cero....but the control do not accept to change the parameters....the parameter (able) is active (1), but the control do not accept to change any parameter....
what can i do to make the control let input the parameters and how can i re-write all the parameters..
is there a way to restableshed it actomatic or i need to write it one by one ?..
thansks...
juan manuel
You need to input 900-920 by hand first.
Power off and on the machine. If you have a computer you can upload all the parameters. If you don´t, then the only way is to input them by hand.
Regards
Alex
i already check the brand of the cnc machine
it is a milling center model 510 cold
with a fanuc OM control
i could write into parameters but i need the parameter list..
is someone can help me...i will be pleasant for that..
bye
hello if yu have a parameter for a milling center..please send me
for fanuc Om thanks
i need fanuc om parameters
if you have it
can you send me an e mail ?
thanks
if some one have a milling center cold 500 with a fanuc control Om...
please send me a list of parameters...thanks
Did anyone help you?
dear, grego
could you send me,fanuc o mate perameter
thank
kocen
I have backup for this model i can mail send your mail id
cnc4365@gmail.com
[QUOTE = GRego; 4831]
Ol