Results 1 to 7 of 7

Thread: Err m01 , 0057 WAIT FOR TAP RETRACT

  1. #1
    Join Date
    Jul 2012
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Err m01 , 0057 WAIT FOR TAP RETRACT

    MESSAGE/ WAIT FOR TAP RETRACT.

  2. #2
    Join Date
    Oct 2011
    Location
    Chicago Area
    Posts
    44
    Thanks
    0
    Thanked 5 Times in 5 Posts

    Default Re: Err m01 , 0057 WAIT FOR TAP RETRACT

    This can be corrected, but the solution varies by controller series.

    Lacking that information, we can still sort out the cause....

    Your Axies are interlocked; this happens when the tap cycle was interrupted. The TRVE plc
    input is high (1), which is telling the controller it needs to complete the
    tap cycle.

    Here's how to work this out on a M70 or M700 series:

    input XCA5 (TRVE) is high
    set YC5C (TRV) high (1)
    Return Z to home position
    when Z is home - turn off YC5C (TRV)

    Parameter 1234.3 will invalidate this behavior if in the future
    the cycle is interrupted.

    On other Mits series, you'll need to locate the I/O names above and
    carry out the same process.

  3. The Following User Says Thank You to camsys For This Useful Post:

    IMED (07-11-12)

  4. #3
    Join Date
    Jul 2012
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Re: Err m01 , 0057 WAIT FOR TAP RETRACT

    what is the menu TRVE??
    input XCA5 (TRVE) is high
    set YC5C (TRV) high (1)

  5. #4
    Join Date
    Jul 2012
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Re: Err m01 , 0057 WAIT FOR TAP RETRACT

    I have m70 cnc

  6. #5
    Join Date
    Oct 2011
    Location
    Chicago Area
    Posts
    44
    Thanks
    0
    Thanked 5 Times in 5 Posts

    Default Re: Err m01 , 0057 WAIT FOR TAP RETRACT

    If you have an M70, then you can go to the DIAGN hard key
    and then PLC I/F softkey.

    Then you can set YC5C to 1 and follow the steps outlined in the earlier post.

    You can download the M70/700 series instruction manual from
    www . meau . com. Here you will find detailed instructions on how to
    use the I/F diagn functions.

    Alternately, you can arrange a field service call from the same website

  7. #6
    Join Date
    Jul 2012
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Re: Err m01 , 0057 WAIT FOR TAP RETRACT

    Where IS SET IN THE M70 CNC?
    HOW TO CHANGE?

  8. #7
    Join Date
    Jun 2013
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Err m01 , 0057 WAIT FOR TAP RETRACT

    heh i got the same error on my machine .... cant find the XCA5 (TRVE) or YC5C (TRV) in the I/F Diagn.

    Anyone who can help me with this.






Similar Threads

  1. Err m01 , 0057 WAIT FOR TAP RETRACT
    By IMED in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 07-12-12, 12:12 PM
  2. Auto retract on CNC before drill burns up
    By cncguy in forum Programming / Applications
    Replies: 11
    Last Post: 02-16-12, 05:47 AM
  3. Johnford ST40a quill won't retract
    By cartertool in forum Machine Repair & Troubleshooting
    Replies: 4
    Last Post: 12-09-10, 10:54 AM
  4. Help on retract tapping using G62.6
    By Bhuvan in forum Programming / Applications
    Replies: 4
    Last Post: 10-01-07, 11:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •