Results 1 to 4 of 4

Thread: Dah Lih vhs 1020 spindel problem

  1. #1
    Join Date
    Nov 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Dah Lih vhs 1020 spindel problem

    Hello everybody.
    I own a Dah Lih vhs1020, with a spindel type "sy-170"
    I dont have any drawing of the spindel.
    I need to replace some parts in the spindel, as it is leaking oil at the spindel nose.
    Does anyone have a drawing of that spindel, or does anyone know of that problem, and could assist me with info??

    Thanks in advance... Martin

  2. #2
    Join Date
    Mar 2009
    Location
    Denmark
    Posts
    34
    Thanks
    0
    Thanked 6 Times in 5 Posts

    Smile Re: Dah Lih vhs 1020 spindel problem

    Where in Denmark are located ?
    Company name.?

    I might have worked on this machine before.

    Best regard.

    Arne Hjeresen
    www.Reparo.dk

  3. #3
    Join Date
    Jun 2017
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Dah Lih vhs 1020 spindel problem

    Quote Originally Posted by martin eg hansen View Post
    Hello everybody.
    I own a Dah Lih vhs1020, with a spindel type "sy-170"
    I dont have any drawing of the spindel.
    I need to replace some parts in the spindel, as it is leaking oil at the spindel nose.
    Does anyone have a drawing of that spindel, or does anyone know of that problem, and could assist me with info??

    Thanks in advance... Martin
    Dear Martin can share the parameters of Dahlih VHS 1020, because I have lost the parameters, I would be really thankful to you

  4. #4
    Join Date
    Jun 2017
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Dah Lih vhs 1020 spindel problem

    Dear do you have the parameters of Dahlih VHS 1020, please share if you have

Similar Threads

  1. 1020 pallet alarm
    By paboy in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 08-01-13, 01:00 PM
  2. acra seiki 1020 with fanuc om
    By vbuzz in forum Machine Repair & Troubleshooting
    Replies: 54
    Last Post: 10-20-12, 02:32 AM
  3. Mazak Quick Turn 6T Tail Spindel doesn't work
    By blacky1641 in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 02-09-12, 01:54 AM
  4. daewoo puma 12lb tape format problem/parameter problem
    By biggrobb128 in forum Machine Repair & Troubleshooting
    Replies: 6
    Last Post: 01-23-12, 10:44 AM
  5. Fanuc Spindel Tapping issue
    By MisterLucky in forum Fanuc Controls
    Replies: 1
    Last Post: 09-07-07, 08:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •