Results 1 to 2 of 2

Thread: Mori Seiki SH-50 (Horizontal Milling Center) B axis wont return home!!!!!

  1. #1
    Join Date
    Jun 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Mori Seiki SH-50 (Horizontal Milling Center) B axis wont return home!!!!!

    An operator hit the reset button in the middle of a pallet change. The B axis is now .011 from zeroing itself out. I have triend manually forcing it home, as well as programming it to go home

  2. #2
    Join Date
    Aug 2008
    Location
    huber heights, ohio
    Posts
    179
    Thanks
    2
    Thanked 12 Times in 12 Posts

    Default Re: Mori Seiki SH-50 (Horizontal Milling Center) B axis wont return home!!!!!

    we have a Mori MH-40 for us their is a switch behind the panel where the operator stands to load parts, it is a round actuator with a notch cut in it and a micro switch. the switch has to be in the notch before the pallet is home. now for us i can access the pallet change motor from the left side as you stand at the parts load station, it is also behind a cover. if it is like ours you should be able to turn the motor shaft from the rear of the motor. turn the motor shaft until the switch seats in the cutout on the actuator the pallet should be home now.

    hope this helps

Similar Threads

  1. End Face Milling Mori Seiki
    By Noel Ryan in forum Programming / Applications
    Replies: 0
    Last Post: 05-04-13, 06:19 AM
  2. Zero return issue Mori Seiki
    By Patriot in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 01-21-13, 02:00 PM
  3. Please help : Permac horizontal milling machine not working
    By mrsrj in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 11-17-12, 09:57 AM
  4. Horizontal Milling Milling Machines over VMC'S?
    By rrogers in forum General CNC & Manufacturing Discussion
    Replies: 6
    Last Post: 10-14-12, 04:21 PM
  5. Matsuura Horizontal Mill MC- 610H-45-p c 6 lost home position
    By Gremlin in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 10-07-11, 01:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •