Results 1 to 2 of 2

Thread: alarm 60 in fagor 8025

  1. #1
    Join Date
    Nov 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default alarm 60 in fagor 8025

    hello
    I have a Fagor 8025 CNC alarm 60, an internal alarm, removable plate i / o failure did not go out but do not pass the initial test, I have manual and connection parameters but have not spoken on alarms. would need some more information thanks

    Eduardo.

  2. #2
    Join Date
    Dec 2011
    Posts
    1
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Re: alarm 60 in fagor 8025

    Quote Originally Posted by eduardo73 View Post
    hello
    I have a Fagor 8025 CNC alarm 60, an internal alarm, removable plate i / o failure did not go out but do not pass the initial test, I have manual and connection parameters but have not spoken on alarms. would need some more information thanks

    Eduardo.
    Error 60 is a hardware fault. The techs at Fagor always say that is by far the worst error you can get on the control because it is a fault on one of the two main boards. So removing the I/O board will not do anything to clear error 60.

    The only way to know which board is bad is to swap a spare of those two boards into the control with one of the original ones to verify which has the error. Not exactly something that can be easily done unless you do have spare boards.

  3. The Following User Says Thank You to Autobiognation For This Useful Post:

    kcho (02-13-12)

Similar Threads

  1. AMADA HDS 8025 PRESS BREAK "error code 2236-Y2 axis sensor abnormal"
    By Blackwme in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 06-13-13, 11:03 AM
  2. Fagor 8055M
    By jawarriot in forum Introduce Yourself
    Replies: 1
    Last Post: 03-29-11, 04:24 PM
  3. fagor 8050 alarm message
    By New Zealand Butlar in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 12-02-10, 03:51 AM
  4. network connection to Fagor 8055i
    By Trevor in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 08-13-10, 12:18 PM
  5. fagor axes drive porblem
    By Dr ec007 in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 07-22-10, 03:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •