Results 1 to 24 of 24

Thread: HARDINGE HC

  1. #1
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default HARDINGE HC

    HARDINGE HC

    Distance Bed to Center of Collet: 6-9/16"
    Diameter of Spindle Hole: 1-1/8"
    Spindle Type: 5C, External Straight Thread (Not Tapered)
    Manual Lever Type Collet Closure for 5C Collets
    (3) Sets of Variable Speed Ranges: 125 to 420 RPM
    375 to 1250 RPM
    1050 to 3000 RPM
    Variable Carriage Feed: 0 to 100 IPM
    Variable Cross Feed: 0 to 100 IPM
    Manual Cross Feed: 4-3/8" Travel

    EQUIPPED WITH:
    Hardened and Ground Dovetail Ways in Good Condition
    Automatic Threading Unit, Model CT-A
    Rear Mount Slide Bar Attachment with Adjustable Tool Holder for Thread Cutting
    Lubro Control Unit, Model CTA
    (1) Hardened Lead Screw Sleeve for Thread Cutting
    (1) Bronze Lead Screw Follower
    8-Position Manual Turret
    6-Position Adjustable Carriage Travel Stop Unit
    Spindle Brake
    (7) Assorted Tool Holders
    Hardinge Work Area Guarding
    Machine Work Light
    Coolant Pump and Piping
    Trav-A-Dial on Carriage
    1/6 HP Coolant Pump, Wired For 3 Phase, 60 Cycle, 230/460 Volts
    1.5 HP Main Motor, 2-Speed, 3 Phase, 60 Cycle, 208 Volts Only
    Machine Test Run on 220 Volts - Runs Good
    Overall Dimensions: 70" L-R x 36" F-B x 67" H
    Approx. Weight: 1,750 Lb.


    CNC Machine Services
    Mechanical, Electrical, and Electronic Repairs on CNC Machine and Manual Machines
    425-788-4500

    Called today we have a huge selections of new and use parts. And New and used CNC machines.

  2. #2
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  3. #3
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  4. #4
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  5. #5
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  6. #6
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  7. #7
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  8. #8
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  9. #9
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  10. #10
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  11. #11
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  12. #12
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  13. #13
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  14. #14
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  15. #15
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  16. #16
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  17. #17
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  18. #18
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  19. #19
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  20. #20
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  21. #21
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  22. #22
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  23. #23
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

  24. #24
    Join Date
    Jun 2011
    Posts
    73
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    This is a thread bump.

Similar Threads

  1. Hardinge GT zero return
    By daddys12 in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 05-29-13, 10:54 AM
  2. Hardinge VMC700
    By cncsales in forum For Sale/Wanted
    Replies: 23
    Last Post: 05-22-13, 01:27 PM
  3. Hardinge Help !
    By Littleton Maintenance in forum General CNC & Manufacturing Discussion
    Replies: 2
    Last Post: 11-08-12, 01:47 PM
  4. Hardinge CHNC 1
    By Miguel in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 05-05-11, 03:44 PM
  5. Hardinge conquest 42
    By mikemck in forum Machine Repair & Troubleshooting
    Replies: 7
    Last Post: 05-14-10, 07:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •