Results 1 to 3 of 3

Thread: Someone please help me with this program

  1. #1
    Join Date
    Jun 2011
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Someone please help me with this program

    Hi everyone, I'm John and I'm new to this forum. I'm programming a VTC30E Kira Production center with a Fanuc 21-M control and I'm getting the following alarm:

    033 NO SOLUTION AT CRC

    It is a simple profile program with 1/2 End Mill as tool 1 (D31)and a 1/4 end mill at tool 2 (D32).

    Thanks guys.

    Here is the program with the two subs:

    %
    O0005 (LOWCYLBRACKET)
    G80
    M19
    G30 Z0.0
    M06 T01 (1/2 INCH EM)
    G28 Z0.0
    G90 G54 M03 S750
    M08
    G0 X2.0 Y-1.0
    G43 H01 Z.100
    M98 P1008 L8
    G0 G91 Z1.00
    M19
    G30 Z0.0
    M06 T02 (1/4 INCH EM)
    G28 Z0.0
    G90 G54 M03 S950
    M08
    G0 X2.0 Y-1.0
    G43 H02 Z.100
    M98 P1009
    G0G91Z1.0
    G91 G28 X0.0 Y0.0 Z0.0
    M30
    %


    %
    O1008 (PROFILEROUGH)
    G01 G90 Z-.032 F30.0
    X.8513 G42 D31
    Y.120 F4.0 {alarm happens right around here}
    X.7342
    G02 Y.2587 R.250
    G03 Y.5585 R.575
    G02 Y.6017 R.250
    G01 X-.8338 Y.9691
    G03 Y.5247 R.275
    G01 X-.6724 Y-.0305
    G02 Y-.2587 R.250
    G03 Y-.120 R.575
    G02 Y.500 R.250
    G01 X2.00Y1.0
    M99
    %


    %
    O1009 (PROFILEFINISH)
    G90 G01 Z-.250 F5.0
    X.8513 G42 D32
    Y.120 F4.0;
    X.7342
    G02 Y.2587 R.250
    G03 Y.5585 R.575
    G02 Y.6017 R.250
    G01 X-.8338 Y.9691
    G03 Y.5247 R.275
    G01 X-.6724 Y-.0305
    G02 Y-.2587 R.250
    G03 Y-.120 R.575
    G02 Y.500 R.250
    G01 X2.00Y1.0
    M99
    %

  2. #2
    Join Date
    Jul 2009
    Location
    Columbus, ohio
    Posts
    247
    Thanks
    0
    Thanked 19 Times in 18 Posts

    Default Re: Someone please help me with this program

    The error means that the control can not figure an intersection somewhere in all the numbers you programmed.
    Is there a way to post a little drawing.
    It would be a lot simpler to explain if everyone could see it.
    I have a few comp examples on the website, I don't know how much they would help you, but take a look.
    www.doccnc.com
    Good luck: Heinz.

  3. #3
    Join Date
    Jun 2011
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Someone please help me with this program

    Thank you for your reply Hienz, I noticed a few errors while waiting for a reply and decided to rewrite the subprogram. I will repost with a print when I have the opportunity.
    -John.

Similar Threads

  1. Nc macro program vs cam program
    By keongloo in forum Programming / Applications
    Replies: 1
    Last Post: 06-25-14, 05:31 PM
  2. DNC - Running new program inside first program
    By btcomp in forum General CNC & Manufacturing Discussion
    Replies: 0
    Last Post: 06-21-12, 01:30 PM
  3. DNC Program for OT
    By drifts in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 11-06-10, 10:01 PM
  4. DNC Program for PDA?
    By jbost in forum General CNC & Manufacturing Discussion
    Replies: 4
    Last Post: 07-27-10, 06:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •