Results 1 to 3 of 3

Thread: Parameter problems with Mori SL6B Fanuc 6T

  1. #1
    Join Date
    Jan 2011
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Parameter problems with Mori SL6B Fanuc 6T

    We have a mori seiki SL6B with a Fanuc 6T control of which we lost the parameters for and are in need of help.

    We tried loading the parameters of an SL3 fanuc 6t thinking we may be able to tweak the parameters once the control allowed to initialize but it is still telling us " not ready"
    The reason this happened was that we had a short in the footswitch for the chuck and while working on the machine we managed to erase the parameters.
    I think we fixed the short but if somebody should have a copy of the wiring diagram as well as a copy of the parameter list it would be much appreciated.

  2. #2
    Join Date
    Dec 2009
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Default Re: Parameter problems with Mori SL6B Fanuc 6T

    At a guess I would have to say, you may not have entered the pc parameters, Do you have them? do you get any alarms at all? I may have a list. Is it a 6ta 6tb or 6bt-2 I need to know the master pcb # A20B or A16B

  3. #3
    Join Date
    Mar 2009
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Parameter problems with Mori SL6B Fanuc 6T

    Post the serial number and if possible the electrical drawing number, it starts with L. With these two numbers I can look up the factory list and foward them two you.

Similar Threads

  1. Help NC Parameter Mori Seiki CL 25 fanuc MF-T8
    By sudirmi in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 02-21-12, 01:58 AM
  2. Problems with Mori MV55
    By Tou in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 02-08-12, 12:21 AM
  3. Mori Seiki SL-25Y, opinions & known problems??
    By Adtech in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 08-31-11, 08:00 PM
  4. error 7001 nv parameter not set problems
    By jm2625 in forum Introduce Yourself
    Replies: 0
    Last Post: 07-25-11, 07:08 PM
  5. Spindle Drive problems Mori
    By Summit11 in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 06-16-09, 01:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •