Results 1 to 4 of 4

Thread: Cincinnati Milacron 15VC1000 PLEASE HELP!!!

  1. #1
    Join Date
    Mar 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Exclamation Cincinnati Milacron 15VC1000 PLEASE HELP!!!

    We are running a 1989 Cincinnati Milacron 15VC1000. We are having some major issues with the machine and it is killing our production. The problems are as follows:

    1. We are having an issue with the output boards that control the high gear and tool change. We have tried switching them and the problem still persists.

    2. We are also getting the two following error codes at random times:
    SYSTEM FAIL 57 & SYSTEM FAIL 58.

    Any ideas on how to troubleshoot this would be greatly appreciated! We are in dire need of help, due to production almost at a stand still!

    THANK YOU!!

  2. #2
    Join Date
    Aug 2008
    Location
    huber heights, ohio
    Posts
    179
    Thanks
    2
    Thanked 12 Times in 12 Posts

    Default Re: Cincinnati Milacron 15VC1000 PLEASE HELP!!!

    what problems are you having with your high/low gear and tool changer?
    what control is on the machine?

  3. #3
    Join Date
    Mar 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Cincinnati Milacron 15VC1000 PLEASE HELP!!!

    We cannot run the machine in high gear. It says, "High Gear On Failure" Alert # 11343. We have found there is a problem on the IO boards, module 5 does not light up on any of the boards. We believe the problem is in the sector master. Does this sound like a possibility. The control that is with the machine is the original from when the machine was built in 1989.

  4. #4
    Join Date
    Mar 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Wink Re: Cincinnati Milacron 15VC1000 PLEASE HELP!!!

    Maybe you need a more dependable machine. I have the perfect option for you listed in classifieds....


Similar Threads

  1. Replies: 11
    Last Post: 05-27-13, 10:22 AM
  2. Cincinnati Milacron Avenger 250MS
    By Sinumeriko in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 07-13-12, 07:51 PM
  3. Cincinnati Milacron Cinturn Rebuild
    By mx731 in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 01-25-11, 01:18 PM
  4. Cincinnati Milacron Toolmaster TM MT
    By jdieter in forum Machine Repair & Troubleshooting
    Replies: 2
    Last Post: 06-25-10, 06:08 AM
  5. cincinnati milacron acramatic 2100
    By mtcalireza in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 02-02-10, 10:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •