Results 1 to 6 of 6

Thread: Fanuc Power mate D backup in Fanuc flash card

  1. #1
    Guest Guest

    Default Fanuc Power mate D backup in Fanuc flash card

    Good Morning to all of u,

    I tried following steps to get :"SYSTEM MONITOR MAIN MENU"

    1.I inserted card in respective slot in CNC, pressed last 2 soft keys(6&7) & sw. ON

    2. Pressed 6 & 7 keys on keyboad & sw ON

    3. Pressed 1 & 6 softkeys & sw. ON

    4. Pressed 1 & 6 keys on keyboard and sw. ON

    5. Pressed 0 & . keys on keypad but sw. on

    but could not get System Monitor Main Menu

    Pl advice

    Thanks

  2. #2
    Join Date
    Sep 2005
    Location
    Wisconsin
    Posts
    1,005
    Thanks
    5
    Thanked 75 Times in 65 Posts

    Default

    What machine and control??

  3. #3
    Join Date
    Mar 2006
    Location
    Singapore
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Hi Maddala,

    It's seems like FANUC control.
    Here is the Step to SYSTEM MONTOR MAIN MENU for FANUC 16/18 i :


    Before you do following steps, Turn Off machine.

    1. ON machine main power, ON Controller power.
    2. While power ON controller, same time you Hold last 2 soft keys ( 6 & 7 ) you mention below.
    3. And "SYSTEM MONITOR MAIN MENU" appear.



    Hope Can help to solve your problem.

  4. #4
    Join Date
    Nov 2006
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    If the control is a Fanuc 160i or 180i (Windows-based "open CNC") control, then you'll need to do it a different way.

    It's a long write-up, so I won't bother until you tell us EXACTLY what control you have there.

  5. #5
    Join Date
    Oct 2007
    Posts
    82
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    On the powermates It's the right arrow soft key and the soft key to its left that you hold on powerup. This can be found in the maintenance powermate maintenance manual in the appendix section
    C.1.1 Starting the boot system

  6. #6
    Join Date
    Sep 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Fanuc Power mate D backup in Fanuc flash card

    You cannot get the boot menu in powermate controller backup through RS232 communication or 4mb Flash card very critical procedure

Similar Threads

  1. Help for Siemens 840D Flash Card Apli
    By bdrk in forum Programming / Applications
    Replies: 0
    Last Post: 06-15-12, 04:43 AM
  2. Powermate D Flash Card Slot
    By RLMTS in forum Fanuc Controls
    Replies: 1
    Last Post: 10-07-11, 12:53 AM
  3. Fanuc Power Mate
    By MWMIKEMW in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 06-22-11, 02:20 PM
  4. power mate alarm
    By moriron in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 10-13-10, 12:37 AM
  5. Fanuc Power Mate D Application
    By johnny in forum Programming / Applications
    Replies: 0
    Last Post: 01-09-10, 01:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •