Results 1 to 4 of 4

Thread: FANUC Series 18i-MB CF Card Problem

  1. #1
    Join Date
    Aug 2018
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Post FANUC Series 18i-MB CF Card Problem

    Hello, I have a HWACHEON SIRIUS-UL machining center with the FANUC controller Series 18i-MB. I tried to insert a CF card to backup the memory, however, the machine did not respond. The message shown is along the line of the machine cannot find a cf card. "MEMORY CARD MOUNT ERRROR.HIT SELECT KEY" Could you advise me on how to solve this problem?

    Thanks in advance for any help

  2. #2
    Join Date
    Aug 2018
    Location
    Finland
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: FANUC Series 18i-MB CF Card Problem

    Hi, i'm not sure about that control but in my FANUC 0i control you have to select proper output/input channel from parameter #0020.
    Example for USB-card i use i/o channel 17.

  3. #3
    Join Date
    Aug 2018
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: FANUC Series 18i-MB CF Card Problem

    Thanks for your suggestion. I may have phrased my question incorrectly. After inserting a CF card and powering on the machine, I tried to select an item from system monitor service menu page and this message "MEMORY CARD NOT EXIST. HIT SELECT KEY." appeared.

  4. #4
    Join Date
    Oct 2011
    Location
    Malaysia
    Posts
    9
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Default Re: FANUC Series 18i-MB CF Card Problem

    Hi, Try formatting your memory card in some other machine in the system monitor service menu. If the memory card mount error occurs in other machine also replace the memory card and adapter. The other case if the memory card is formatted in the other machine and if it doesnt work here then replace the memory card port in your cnc system. Hope this helps.

Similar Threads

  1. FANUC control card
    By Nida in forum Fanuc Controls
    Replies: 0
    Last Post: 02-22-18, 12:36 AM
  2. memory card or master card defective?
    By ptkk in forum Machine Repair & Troubleshooting
    Replies: 0
    Last Post: 02-03-12, 04:18 AM
  3. Need PCMCIA LAN Card fanuc
    By ezequielargentina in forum For Sale/Wanted
    Replies: 0
    Last Post: 10-28-11, 07:16 PM
  4. Fanuc Power mate D backup in Fanuc flash card
    By Guest in forum Fanuc Controls
    Replies: 5
    Last Post: 09-06-10, 09:02 AM
  5. Fanuc Series 21 memory card
    By Leland Krum in forum Fanuc Controls
    Replies: 1
    Last Post: 03-03-10, 10:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •