Results 1 to 2 of 2

Thread: I need your help

  1. #1
    Join Date
    Nov 2017
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default I need your help

    Dear all member!
    I recently get a trouble with Fanuc series 20F. when machine is changing tool I put emergency. After open machine, my milling machine occur arlam code 1002 and code 2000 Axis intelock and axis zero missing, event ATC, APC and tool position and waiting tool position on the panel not light ( tool number and waiting tool is 00).if you are a profesional or you have experence in this field.Please show me how can I release this problem.
    I am looking forward toward for getting your help!
    David Binh

  2. #2
    Join Date
    Nov 2017
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: I need your help

    you need to check the ATC recovery sequence and signals, maybe one or more signals are not being activated or deactivated.

    Regards

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •