Hi my name is Derek I'm new to the form but been stuck reading for information on grinding and how to use the probe.

My questions are how would use go about making a 50 degree radius on my cutting wheel. I follow the book specs and seems I always end up with around a 40 degrees. I have the tool nose radius counted in and have tried going for a 55 degree to see if it would help and still no luck. If anyone has any input or a code they feel would work for this.

My other question was how to set a up the probe as the book doesn't give me good info where to set the reading from. If u have any question or answer feel free to email or leave it here.

Thank you