Results 1 to 2 of 2

Thread: Ball bar QC10 - need advice

  1. #1
    Join Date
    Sep 2017
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Ball bar QC10 - need advice

    Hallo Forumers,

    We have Ball Bar QC10 . We use it to for checking of conditions/deviations from normal state of our CNC milling machines (DECKEL MAHO, DMG with Dialog 4, Dialog 11 and Sinumeric 810).
    We would like to create data base, connected to our ERP system, in which:

    • to fill/describe all type deviations/defects of machines and which deviations are normal/admissible and which not ( same as tolerances of dimensions on the drawings);
    • to enter each machine which we have and to upload results from check with ball bar to each machine with description/analysis of condition of machine;
    • to can check condition of machine and to compare change of conditions during machine usage for long period of time;
    • when machine conditions are out of normal deviations filled in to data base and machine defects will influence over its performance/ achieved quality of production ERP system to send notification to manager of Machines Maintenance Department, QA Manager, Production manager and Supervisors;
    • to can fill inside information for urgent services of machines and to create a schedule for regular machine services/to create maintenance schedule for each machine and again ERP system to send notifications when should to be done prophylactic service of machines;


    Our ERP system use Microsoft SQL code.

    Could you help us with this project and give us terms of references how to proceed.

    Thank you in advance for your help and cooperation!

  2. #2
    Join Date
    Sep 2017
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Re: Ball bar QC10 - need advice

    Could anybody help us with this project?

Similar Threads

  1. Mori Seiki ball screw repair
    By vclark in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 07-31-09, 05:16 PM
  2. Need Help In Ball screw assembly
    By keyanvmc in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 06-08-09, 09:13 AM
  3. Changing thrust bearings on a ball screw?
    By prock40 in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 09-18-08, 10:18 PM
  4. Ball screw
    By dodge_99 in forum Machine Repair & Troubleshooting
    Replies: 3
    Last Post: 08-07-08, 07:17 AM
  5. How to set gridshift after replacing ball screw?
    By Tom in forum Machine Repair & Troubleshooting
    Replies: 1
    Last Post: 01-14-07, 08:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •