Osp5000l rs232

[Graham]

Hi All
I have a Okuma LC20 CNC lathe with a OSP5000L controll
Trying to connect it to my PC
Please I need the cable configuration 25pin - 9 pin.
Also need all the parameter settings
Thanks

[angelw]

Originally Posted by Graham

Hi All
I have a Okuma LC20 CNC lathe with a OSP5000L controll
Trying to connect it to my PC
Please I need the cable configuration 25pin - 9 pin.
Also need all the parameter settings
Thanks

Hi Graham,
Following are the cable configurations, control parameter settings, and PC Software configuration for Software handshaking.

Regards,

Bill

Cable configuration for Xon Xoff (software handshaking)
Machine Side -------------- PC Side
DB25 Male ----------------- DB9 Female
1 --- Shield Ground ------- Not connected
2 ---------------------------- 2
3 ---------------------------- 3
4
| Bridged
5
6
|
8 All Bridged
|
20
7 ---------------------------- 5

Control parameter settings
#1 = 0 - No Tape Leader/Trailer
#34 = 10 (CN0) - Time Before Alarm
#39 = 4800 - Baud Rate (Starting point)
#44 = 0 - Punch Device #
#45 = 0 - Input Device #
#46 = 0 - Output Device
#54 = 1 Read Device
#57 = Time Before Alarm
Optional Parameters
#1 = 00001011 - Set for ISO Code
#12 = 10100010 - 1 Stop Bit, Even Parity

PC Software settings
Handshake Method = Xon Xoff (Software Handshaking)
Baud Rate = 4800 (or whatever the control is set to)
Data Bits = 7
Stop Bits = 1
Parity Bit = Even

To Send a file from control to PC
1. Edit Mode
2. [F3](PIP)
3. [F2](Punch)
4. Type file name, then [Return]

To Receive a file from PC
1. Edit Mode
2. [F3](PIP)
3. [F1](Read)
4. [Return]

[Graham]

Thanks for the info
But OSP5000L parameters only go up to #32
What you gave me is for OSP5000L-G
But will try anyhow and let you know
Really appreciate the assistance

[CNCBOY1]

Originally Posted by Graham

Thanks for the info
But OSP5000L parameters only go up to #32
What you gave me is for OSP5000L-G
But will try anyhow and let you know
Really appreciate the assistance

Hallo

set 16 bit 7 to 1 (one) and you get more param's

rg

[Graham]

Hi rg
Thanks
Parameter #16 bit 7 is already one
Thanks for your assistance appreciate it
Graham

[CNCBOY1]

There are more #16 bit7 to set to one (1)