Any body need Haas CNC help?

[HARVEY]

I'm here to help folks who have any kin a CNC problem specially Haas. I will try my best to solve your problem at first reply. I have about 10 yrs CNC field service experience. I will feel great to help others. Please feel free to send me e-mail at htakhi_usa@yahoo.com

Harvey
NC-USA

[TimH]

Originally Posted by HARVEY

I'm here to help folks who have any kin a CNC problem specially Haas. I will try my best to solve your problem at first reply. I have about 10 yrs CNC field service experience. I will feel great to help others. Please feel free to send me e-mail at

Harvey
NC-USA

YEs I have a question. I recently replaced the processor board on my TM2. The new board has a USB port on it. The machine did not come witha USB port. When the tech loaded software back into the machine he used the USB port to load it. When he was finished the USB port was deactivated. I called my HFO they told me there is nothing that can be done except upgrades the control panel for some ridiculous amount of $. So my question is, isn't there a software patch that can be put in the machine to make the port work? New processor board part # 93-32-4412A . I know my HFO would fix it if they could but its a bit frustrating that the port is there but can't be used.

[hannibal]

it's very nice of you thank you in advance which are the machines that you manipulate what software you use for cam

[wildcatmachine]

as a matter of fact i do
my tl-2 (2007 model) keeps asking me to install tools
it has never done this b4
as soon as it finishes the powerup and restart
an alarm sounds and it asks for tool 1 to be installed
i can just put numbers in the offset which shuts it up
the program im using has t1010 selected so when i puch cycle start
it asks for tool 10 to be installed
help