live tooling on Hardinge GT27SP

[dango]

I have problem connecting live tooling
M53 or M54 connect the motor and the coolant
when the command line in my program is M53 or M54 it connecting
the coolant but the live tooling not I does not have electric drawing
maybe some one can help me with explanation how it connected or
with some drawing

[sinha_nsit]

Ask your MTB. Only they know what M-code they have defined for specific purposes. Look for their manuals for M-code list. Sometimes they even print it on the machine.

[MarkT]

Originally Posted by dango

I have problem connecting live tooling
M53 or M54 connect the motor and the coolant
when the command line in my program is M53 or M54 it connecting
the coolant but the live tooling not I does not have electric drawing
maybe some one can help me with explanation how it connected or
with some drawing

Have you tried to put P1 or P2 or P3 after the M53/M54 command ? Hardinge use a spindle number as an identifier P1 for spindle 1, P2 for sindle 2, P3 for spindle 3, so your so your command should look like: G97M53S2000P2.

Regards

Mark