| |
| |||||||
| Home | Recent Posts | HELP-FORUMS (ask/answer) | Classifieds-free | File Sharing / Documents | Photo Galleries | Polls | Newsletter | Machinetoolhelp.com. |
| Fanuc Controls Fanuc controls forums discussion for all related machine tool CNC Fanuc Controls- 0, 3, 6 Fanuc 10/11/12, 15, Fanuc 16/18/21, 160, 180, 210, All Fanuc I-series controls, 16i, 18i, 21i, 31i, 160i, 180i, 210i, 310i and more. Post fanuc problems and help troubleshoot Fanuc alarms and error codes. |
 |
| | Bookmark or Share | Thread Tools | Search this Thread | Display Modes |
02-20-12, 12:43 PM
| |||
| |||
 Re: Johnford counter sensor alarm
Rick, As I posted in your other thread we need more information. What control are you using? What is the alarm number? When is the alarm occuring, etc? Is this a seperate issue of the other thread or did you start 2 threads with the same question? If it is the same issue let me know as I can delete 1 thread so we are not bouncing and responding in 2 different threads. Stevo (The opinions in this post are my own and not those of machinetoolhelp.com and its management)  |
|
03-13-12, 06:44 AM
| |||
| |||
| Re: Johnford counter sensor alarm
When our johnfords do this usally 1 of 2 things correct it. Most of the time you can just manually jog magazine in reverse a few pots and it will clear itself, if not go to SYSTEM-PMC-PMCPRM-COUNTER and set the preset and current settings to the same value. The machine will usually lose tool pot positions so you will have to make sure you have the correct tool in the spindle.....Other than that,Bad prox........This is the only way i know to clear the alarm.....hope it helps.
Last edited by damnifiknow; 03-13-12 at 06:53 AM. |
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Linear Mode
