| |
| |||||||
| Home | Recent Posts | HELP-FORUMS (ask/answer) | Classifieds-free | File Sharing / Documents | Photo Galleries | Polls | Newsletter | Machinetoolhelp.com. |
| Fanuc Controls Fanuc controls forums discussion for all related machine tool CNC Fanuc Controls- 0, 3, 6 Fanuc 10/11/12, 15, Fanuc 16/18/21, 160, 180, 210, All Fanuc I-series controls, 16i, 18i, 21i, 31i, 160i, 180i, 210i, 310i and more. Post fanuc problems and help troubleshoot Fanuc alarms and error codes. |
 |
| | Bookmark or Share | Thread Tools | Search this Thread | Display Modes |
01-11-12, 01:25 AM
| |||
| |||
 Fauc 10t
God Morning! I'am facing problems with a FAnuc 10T System. From time to time the CNC hangs up, on the ground print # A16B-1010-0040/04C, the LED red and green is " ON " Alarm diplay ist with message " 1 " The diplay is with LED red and green " ON ". On the input/output print, the red LED is " ON ". Can switch OFF the System, then it starts again for a while. Does anybody have experience with this kind of problems? Thanks in advance, Henri  |
|
02-20-12, 08:03 PM
| |||
| |||
| Re: Fanuc 10t
If the system is hanging up, you probably have a bad master pcb. First of all, you need to make a backup of the memory. Be sure to write down all the PC parameters. Red led on means you have a watch dog alarm. A number 1 is ok. Regards Alex |
|
02-22-12, 10:03 AM
| |||
| |||
| Re: Fauc 10t Quote:
Glad you solved your problem. |
|
02-24-12, 01:04 PM
| |||
| |||
| Re: Fauc 10t
Henri, Thank you for coming back an posting your solution. Stevo (The opinions in this post are my own and not those of machinetoolhelp.com and its management) |
|
02-24-12, 01:04 PM
| |||
| |||
| Re: Fauc 10t
Henri, Thank you for coming back an posting your solution. Stevo (The opinions in this post are my own and not those of machinetoolhelp.com and its management) |
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Linear Mode
