Fanuc 31i DNC operation (REMOTE)

[Castro]

Hello everyone, I need your help.I am working with 31i and 32i Fanuc controllers and I will like to use the DNC operation(RMT Mode) not with a memory card but with a computer.

Until now, DNC operation has been made with the memory card. Nevertheless, we have built a CNC ethernet network, so now we have the CNC machines connected to a PC. At the moment I am transferring programs from the PC to and from the CNC using CIMCO software. Now each CNC machine has a specific folder in the PC.

As I mentioned, I will like to perform DNC operation (RMT Mode) with the PC instead of the memory card.

Note: By activating automatic operation during the DNC operation mode (RMT), it is possible to perform machining (DNC operation) while a program is being read in via reader/puncher interface.


I will greatly appreciate any information you could share with me about this feature.
Thanks,
Gonzalo

[alexfanuc]

You need to change parameter 20 to a zero.
Regards
Alex

[Castro]

Hola Alex eres mexicano?

Intente lo que me sugeriste pero eso no me permite activar la operacion DNC con el modo ethernet.

Alguna otra sugerencia?

Gracias