Fidia Air/Oil Oil Pressure Fault

[service_bb]

Been spinning my wheels for a few days on this one.

Replaced the pump (both air and oil pressure switches are part of the unit), Blew through both oil and air line to asure nothing is obstructing. Air solenoid is firing to get initial pressure, but it drops right back off. I am getting al my voltages (as far as I can tell) including at the DRXTW-2 Board.

[thelonegunmen]

not sure which pump you are referring to maybe an air over hydraulic pump but if it pumps liquid. and you replaced the pump and also cleaned out all the lines sounds like you may need to bleed all your lines also you would want to watch your levels to ensure you are not running the tank dry filling the lines back up. if i mis-understood my apologies maybe a little more info would help.

[service_bb]

Finally got it. The Main air coming into the machine was losing pressure (after the guage) due to a clogged trap. Took the whole thing apart and blew quite a bit of gunk out of it.

[Fidia_Help]

Make sure your settings are to book spec. on the oil air mix and the air if they are not set right it will show Faults on pc.