 SL10 Deadcenter recalibration
Hello Harvey,
since januari first, I have a SL10 and a VF MiniMill. Minimill goes perfect but the SL10 has had a tailstock accident and the center is about a millimeter wrong. I've read somewhere you have a servicemaual to fix this problem. Service of Haas in Holland is bad and expencive so I hope I can do it myself. Also good for learning about this machine.
Do you have good advice and maybe you can email the service manual? It's rather frustrating that after learning programming the Mill, the SL10 stays workless....
Best regards from Holland,
Willem de Zeeuw
Last edited by Willem de Zeeuw; 02-02-11 at 07:30 AM.
Reason: Wrong item
|